Attention: The carbon brushes must be checked for wear at regular intervals and replaced as necessary when worn down to approx. 10 mm in length. If not, the motor will not be replaced under warranty in the event of a motor failure.

The fabric filter must also be cleaned at regular intervals using dry cleaning methods (not using high pressure cleaning) and replaced as necessary. Failure to do so results in higher operating temperatures that can cause the vacuum motor(s) to malfunction.

The vacuum cleaner is equipped with three individually switchable motors each with a power output of 1200 watts.
The 85-litre INOX dirt container rests on a metal chassis and can either be used in the tilt function by switching 2 buttons or can be removed completely from the frame.
A hose holder and an accessory basket are mounted on the chassis itself as standard.
The vacuum cleaner itself can be set up outside the vehicle, as the suction hose has a total length of 12 meters thanks to the presence of the three powerful motors.

Supplied with
a standard accessory set diameter 35 mm (ID) - DN
Turbo upholstery nozzle, 160 mm (art. no. Z813101)
Turbo upholstery nozzle 270 mm (art. no. Z813102)
Hand-held section with bend no. 6158 (art. no. Z813103)
Upholstery nozzle no. 616 (art. no. Z813104)
Crevice nozzle No. 617 (art. no. Z813105)
Brush nozzle no. Z813106 (art. no.

Standard accessory set diameter 45 mm (ID) - DN38
12.m suction hose with couplers (art. No. Z813110)
Reducer no. 6 (art. no. Z813111)
Floor brush nozzle no. 6384 (Z813113)
Crevice nozzle no. 3 (art. no. 1813003)
2 standard PVC extensions (art. no. Z813115)
Replacement fabric filter without basket (art. no. 1813035)
Water suction nozzle no. 6365 (art. no. Z813112)
Including accessories basket and hose holder for the trolley.

Dimensions of vacuum cleaner without trolley: Height = 930 mm, diameter = 415 mm
Weight: 32 kg