Attention: The carbon brushes must be checked for wear at regular intervals and replaced as necessary when worn down to approx. 10 mm in length. If not, the motor will not be replaced under warranty in the event of a motor failure.

The fabric filter must also be cleaned at regular intervals using dry cleaning methods (not using high pressure cleaning) and replaced as necessary. Failure to do so results in higher operating temperatures that can cause the vacuum motor(s) to malfunction.

The vacuum cleaner is equipped with three individually switchable motors each with a power output of 1200 watts.
The 85-litre INOX dirt container rests on a metal chassis and can either be used in the tilt function by switching 2 buttons or can be removed completely from the frame.
A hose holder and an accessory basket are mounted on the chassis itself as standard.
The vacuum cleaner itself can be set up outside the vehicle, as the suction hose has a total length of 12 metres thanks to the presence of the three powerful motors.

Delivery includes accessories:
- 12 metre hose with sleeves
- Turbo upholstery nozzle + reducer
- Turbo floor nozzle
- extension 
- Hand-held section without thread reducer
- Upholstery nozzle
- Crevice nozzle 
- Crevice nozzle 
- Brush 
- Water vacuum nozzle 
- Floor brush nozzle
- Extension
- Hand-held section
- Accessory basket
- Hose holder

with float basket and float ball

Dimensions of vacuum cleaner without trolley: Height = 930 mm, diameter = 415 mm
Weight: 32 kg

 
Not suitable for self-service operation!